dB-Mark DP26+ V2 - 2-in 6-out Digital Active Crossover

dB-Mark DP26 PLUS V2 - 2-in 6-out Digital Active Crossover

July 2021 Update DP PLUS V2 series allows remote control over LAN via TCP/IP with built in web-based GUI - currently this works with PC only and is not compatible with Apple based products

• 2 balanced inputs and 6 balanced outputs on XLRs. Outputs are impedance balanced, and not fully active balanced
• DP+ Series allows remote control over LAN via TCP/IP with built-in web-based GUI
• All channels can be configured using Parametric EQ, High/Low Shelf EQ, and 1st/2nd order All Pass filters.
• Fully adjustable crossover filters on all output channels, with slopes from 12dB to 48dB per octave.
• Linkwitz-Riley, Butterworth, or Bessel curves can be individually selected on the high-pass and low-pass.
• Each input has 2 dynamic EQs, noise gate, and adjustable compressor.
• Automatic Gain Control available on input channels.
• Configurable compressor and peak limiter on every output channel.
• Delay on all channels, adjustable in milliseconds, metres or feet.
• Full matrix mixing, route any input to any output.
• All input and output channels can be individually muted.
• Channels can be linked for convenience to allow editing of two or more channels at a time
• 32-bit digital signal processor with 24-bit 96KHz A/D and D/A converters.
• USB 2.0/3.0, RS485*, and Ethernet connections are provided for PC control of multiple devices.
• Operation possible using the front panel controls, Windows app, or the built-in web interface.
• 30 user-program presets can be stored into the device and recalled, or backed-up to PC via USB.
• Password protection for partial or full lock of system settings.
• LED indicators on all input and output channels for level, mute, compressor, limiter, and peak/clip.
• 2x24 character dot-matrix blue back-lit LCD display.
• Gross weight: 5kg
• Shipping Dimensions: 562mm x 296mm x 98mm
• Power 110V /220V AC 50/60Hz <25W

Please click here to visit www.dbmark.co.uk downloads page for all relevant software

Specifications

• Input Channel & Socket 2CHs, Female XLR
• Output Channel & Socket 8 CHs, Male XLR
• Input Impedance Balance: 20KΩ
• Output Impedance Balance: 100Ω
• PC Com Port One USB Com Port on front panel, 2 RS485 Com Port on back panel(RJ-45)
• CMRR >70dB(1KHz)
• Input Range ≤+25dBu
• Frequency Response 20Hz-20KHz(-0.5dB)
• S/N R >104dB
• THD <0.01% OUTPUT=0dBu/1KHz
• Crosstalk of Channels >104dB(1KHz)
• Functions of Input Channels
• Input Mute Each channel has Independent Mute Control
• Input Delay Each channel has Independent Delay Control Range:0%u20141000ms stepover 21us@<10ms; stepover 84us@10-20ms; stepover:0.5ms@>20ms
• Input Polarity Same Phase !plus! or reversed Phase -
• Input EQ Each Input Channel has 6 Bands Parametric EQ Central Frequency Point:20Hz-20KHz, 239 frequency points totally Band Width:0.01oct-3oct @ stepover is 0.01oct Gain:-20dB-!plus!20dB @ stepover , 0.1dB
• Functions of Output Channels
• Output Mute Each channel has Independent Mute Control
• Output Selection Each input channel can be selected to each output channel
• Output Gain Range:-12dB~!plus!12dB, step: 0.1dB
• Output Delay Each channel has Independent Delay Control Range:0%u20141000ms stepover 21us@<10ms; stepover 84us@10-20ms; stepover:0.5ms@>20ms
• Output Polarity Same Phase !plus! or reversed Phase -
• Crossover Each Channel can be set up LPF and HPF independently.Adjustable Parameters: Filter Types (Linkwitz-Riley/Besse/Butterworth ) Frequency Turning Point:20Hz-20KHz, 239 Frequency Points Decay of Slope:12dB/oct, 18dB/oct,24dB/oct, 48dB/oct
• Limiter Each Channel can be set up limiter independently. Adjustable Parameters: Threshold Value:-20dBu-!plus!20dBu Stepover:0.5dBu@starting time:0.3ms-100ms Stepover<1ms @0.1ms, Stepover>1ms@1ms
• Output EQ Each output channel can be set up as 6 Bands EQ. EQ Paramater , Lo-shelf/Hi-shelf can be selected for EQ Modes. When set as Parameter, the centre Frequency will be 20Hz-20kHz,the total Frequency points is 239.Band width:0.05 oct-3 oct.Step is 0.05 oct,Gain: -20dB-!plus!20dB, Step is 0.1dB.When set as Lo-Shelf and Hi-shelf,the centre Frequency is 20Hz - 20k Hz,the total Frequency points is 239, the slope is 6 dB/12 dB.Gain:-20dB-!plus!20dB.Step is 0.1 dB.
• Processor 96KHz Sampling frequency, 32-bit Floating-Point DSP
• Display With 2*24 LCD, 8-LED input/output level. Mute and Editing mode can be displayed.
• Power %u226425W
• Power Supply AC110V/220V 50/60Hz
• Product Dimension(W*D*H) 482*232*44mm
• Net Weight 3.6kg
• Shipping Dimension(W*D*H) 1PC:562X362X98mm/0.0199m3 6PCS:575X375X608mm/0.1311m3
• Gross Weight 1PC:4.6(kg)
• DAC Chip: Cirrus Logic CS4382A
• ADC Chip: Cirrus Logic WM8786
• DSP Chip: Texas Instruments TM320C6726
• Op Amps: NJR NJM2068M