dB-Mark DP48+ V2 4-in 8-out Digital Active Crossover

dB-Mark DP48 PLUS V2 - 4-in 8-out Digital Active Crossover

July 2021 Update DP PLUS V2 series allows remote control over LAN via TCP/IP with built in web-based GUI - currently this works with PC only and is not compatible with Apple based products

• 4 balanced inputs and 8 balanced outputs on XLRs. Outputs are impedance balanced, and not fully active balanced
• DP+ Series allows remote control over LAN via TCP/IP with built-in web-based GUI
• All channels can be configured using Parametric EQ, High/Low Shelf EQ, and 1st/2nd order All Pass filters.
• Fully adjustable crossover filters on all output channels, with slopes from 12dB to 48dB per octave.
• Linkwitz-Riley, Butterworth, or Bessel curves can be individually selected on the high-pass and low-pass.
• Each input has 2 dynamic EQs, noise gate, and adjustable compressor.
• Automatic Gain Control available on input channels.
• Configurable compressor and peak limiter on every output channel.
• Delay on all channels, adjustable in milliseconds, metres or feet.
• Full matrix mixing, route any input to any output.
• All input and output channels can be individually muted.
• Channels can be linked for convenience to allow editing of two or more channels at a time
• 32-bit digital signal processor with 24-bit 96KHz A/D and D/A converters.
• USB 2.0/3.0, RS485*, and Ethernet connections are provided for PC control of multiple devices.
• Operation possible using the front panel controls, Windows app, or the built-in web interface.
• 30 user-program presets can be stored into the device and recalled, or backed-up to PC via USB.
• Password protection for partial or full lock of system settings.
• LED indicators on all input and output channels for level, mute, compressor, limiter, and peak/clip.
• 2x24 character dot-matrix blue back-lit LCD display.
• Gross weight: 5kg
• Shipping Dimensions: 562mm x 296mm x 98mm
• Power 110V /220V AC 50/60Hz <25W

(*Phoenix connector required for RS485)